Semi automatic PET bottle blowing machine for 3-5gallon
Adopt the new type double bend arm and four pull rod-clamping structure (won the patent). Cross direction; middle mould board is move parallel; the distance between two mold bases is adjusted by the chain wheel. Thus, the clamping force is very strong.
The machine frame is produced by the whole complete casting bottom, so that the machine is firm and running stable.
Adopt the straight slide way, reduce the friction and lengthen the life of the machine.
Double start working button, which is designed for avoiding the injury.
Power saving design that can increase your profits.
The single direction of pre-form placing and bottle picking, which increase the output.
Segregate type air controlling system, which is designed for avoiding waste pollution.
The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.
Technical parameters
GENERAL INFO | RM-5G |
Theoretical output | 90BPH 18.9L |
Heating capacity | 11-14kw |
Max bottle volume | 22L(1Cav) |
Blowing pressure | ≤3.5MPa |
Motion pressure | ≤1.0MPa |
Mac diameter*height | Φ330*H600mm |
Mould thickness | 120-600MM |
Weight | 1600KG |
Main machine | 2300*840*2150mm |
Heater | 2800*770*1750mm |
Rachel MachineProducts Center
Zhangjiagang Rachel Machine Co.,Ltd.
TEL:86-512-58905976
FAX:86-512-56910976
MOB:86-13962244083
ADD:Leyu Econmic Development Zone,Zhangjiagang,Jiangsu,P.R.China